Read More Below

Installing a Glass Shower Enclosure Dallas

Installing a Glass Shower Enclosure Dallas

Installing Glass Shower Enclosure

Installing a Glass Shower Enclosure

Dallas, TX- Installing a glass shower enclosure adds style, safety and modern appeal to any bathroom. They also help make small spaces appear larger by reflecting light.

However, these heavy glass doors can be difficult to install. That’s why it’s important to hire a professional for the job. If you re searching for a local Dallas company for install your glass shower enclosure, then we are here to help!

Measure the Area

Before installing a glass shower enclosure, it is important to measure the area to ensure you will be able to open the door and not hit anything. Depending on your door type (sliding, pivot, hinged), this can be a tricky task!

Measure the opening width from wall to wall in two places. This is especially important for alcove showers/bathtubs where walls may distort over time or have been built slightly out of square in the first place.

Measure the Curb

Whether you’re installing a shower enclosure with a curb or without one, make sure it is sloped inward to avoid water pooling and then leaking onto the floor.

The optimum pitch for curb tops is 1/8’’ to 3/16’’. Otherwise, standing water will collect on the curb and it could leak into the bathroom.

You should also measure the height of the shower from the side to the center of the curb and from the center to the top for an inline opening. This is important for frameless glass shower doors.

Measure the Glass

Whether you’re installing a standard or custom glass shower door, accurate measurements are crucial. For framed or frameless options, you’ll need to measure the opening width, height and even consider the thickness of the glass.

The right measurement can mean the difference between a leaky or leak-proof shower and a shower with a wow factor. With a little research and some time, you can get your new Houston glass shower enclosure looking as great as it works!

Installing a Glass Shower Enclosure Dallas
Installing a Glass Shower Enclosure Dallas

Measure the Track

A glass shower enclosure adds a modern touch to any bathroom. It also reflects light and brightens small spaces.

Installing a glass door requires precise measurements. Make sure to take measurements from the wall top, center, and bottom to ensure the shower door will fit properly.

Once you know the dimensions of your door, measure the track. You’ll need to cut the base track to fit tightly between your stall walls.

Measure the Hinges

Before installing a glass shower enclosure, it’s important to measure the door hinges. These will determine if there is enough space for the door to swing open without hitting anything.

Extend a tape measure to the desired width of the door and hold one end on where the hinges would be. Pull it in a semicircular motion to ensure there is room for the door to swing.

Measure the Rollers

If you need to replace the rollers of your glass shower enclosure, make sure to measure them. This will help you determine what size you need to buy and install them properly.

Unless your rollers are extremely old and worn out, they probably haven’t lost too much diameter in the abrasion process.

Before installing new rollers, you’ll want to remove them and clean the channels. This will ensure that the rollers are free of debris and ready to slide smoothly.

Measure the Hardware

Knowing precisely how to measure the hardware of a glass shower enclosure is essential. This will ensure that the unit is installed correctly and will fit the opening exactly.

When you choose a glass shower enclosure, there are several types to consider. Some of them include sliding and pivot doors.

Both have their pros and cons. Sliding doors are a compact option that can open out or in. However, these are more difficult to install than pivot doors.

Install the Hardware

When you’ve made the decision to install a glass shower enclosure, the next step is to understand the hardware that you’ll need. It’s important to make sure that you use high quality components so that your shower will last for years to come.

It’s also a good idea to ensure that you do not create any gaps where water can leak out of the shower enclosure. This can lead to mould and mildew growth.

Back to Blog >